192.168.1.250

As you are aware, networking device has an IP address that enables it to access internet services. You can access the networking device admin login interface by using the IP addresses that are assigned to routers, extenders, and mesh WiFi. The private IP address 192.168.1.250 can be used to modify the default modem or router settings, WiFi password, and Network Name.

How to Login to Admin via 192.168.1.250?

You can login to the interface by this IP. Follow these steps to know, how:

• Firstly, you need a computer; turn on your computer and open the updated web browser.
• Then in the address bar of a web browser, just simply type 192.168.1.250.

• Afterwards, click Login after entering your username and password; which will be your default credentials.
• Once you are logged in, you will be able to access the Netgear extender Genie, where you can configure its settings.

Now, you have admin’s access which means after logging into the interface; you can customize various settings. You can change the WiFi password or Update the firmware.

How to Change WiFi Password using Admin IP?

One of the easy tasks is to change the network name and password; have a look on these steps to learn, how:

• First you need to have the access of Netgear Extender settings by logging in to the interface.
• Navigate to the Wireless Settings.
• In the Network Name field, just simply type the WiFi network name you want to keep.
• In the WiFi Password, type the WiFi new Password for your network.
• Select ‘Save/Apply’.

How to Update Firmware Using Admin IP?

You can update the firmware of extender or router using this IP; just follow these steps to learn, how:

• While you are connected to the router’s network, launch a web browser.
• Then you need to enter the router or extender IP address, which is 192.168.1.250
• Then login to the interface; by entering your username and password.
• Your default username and password is usually written on the bottom of your device or check the user manual. After entering the credentials; click on ‘Login’.
• Once you are logged in; dashboard has been appeared to you.
• There you have to go to the firmware or update tab, which is typically located under the Advanced, Settings, or Administration tabs.
• Then click on update and wait till the update is not completed.

Troubleshooting Issues Accessing IP

While accessing the IP; if you faced any troubles then follow these tips to resolve your issue:

Router Login Page Not Loading

Verify that the device you are using is linked to the WiFi, if the login page is not loading. Additionally, you should see if the default router IP address is set as the default one.

Check Typed IP Address

You should verify the IP address you entered in your computer’s browser’s address bar. Verify that the IP address is accurate, 192.168.1.250.

Ensure Computer Receiving Internet Signal

Always make sure that your device is connected the internet. And if connected with the Ethernet cable then check that cable is insert securely. To access the interface and configure the device, the networking device needs to be linked to the home device. Make sure there is no interference with internet connection during the firmware update.

Use Updated Web Browser

You will undoubtedly run into issues if you are attempting to access the settings interface using an out-dated web browser. Thus, update your browser by doing the following:

• Navigate to Settings after opening the browser.
• Choose the ‘About’ option here, then look for the ‘Update’ button.
• To begin, click the Update button.

Disable Antivirus Temporary

The admin login procedure may be hampered by the antivirus software on your PC or laptop and the ad blocker in your browser. As a result, turn them off for the time being. You can turn them on after your networking device is configured.

Forgot Login Password

If you forgot the login password then you are left with only one option; which is resetting your device. To reset, press and hold the tiny black button on the back of your router for around 10 seconds then release it. Your router will be reset to its original settings as a result. All you have to do is configure your extender/router, again

Here in the Blog; you have learned about the admin login IP address 192.168.1.250, and all the further details regarding IP.