Setup Guide for Setek WiFi Extender
The range extenders are networking devices, which connects with router easily and extend your router reach in your home. We will discuss Setek WiFi extender setup, in which you will get to know how to connect it to home network and how to reach to its interface via computer. we will also provided instructions to update the firmware and troubleshoot technical issue.
Setek WiFi Extender Setup
Ethernet Cable Link
You have to place the extender near to the home WiFi router. Then simply, connect your router LAN port to the extender port by using the Ethernet cable.
After that, you have to turn it on by plugging it into the electric wall socket.
WPS Method Link
You have to plug the extender in to the power outlet first and power it on.
After that you have to press the WPS button on the router and press the same button on the extender within two minutes. Then, both the devices will connect wirelessly.
It is time to log in to the interface of the Setek WiFi extender via your computer.
Setek WiFi Extender Login
- Connect the computer or laptop to the extender network.
- Go to the web browser and search IP address 192.168.10.1.
- The interface login page will comes on the screen; here you have to enter the username and password.
- The username and password are given on the label or in the user manual of the Setek WiFi extender.
- Then simply, log in to the interface dashboard, in which you can easily adjust settings and networks.
After setting up the extender, you must know how to update the extender, you can use these below given steps.
Update Setek Extender Firmware
- Access the Setek interface and select the Settings> Firmware tab.
- Before that, you have to download the firmware file from web.
- Then simply, paste the downloaded file in firmware tab and click on Install.
Now, let’s learn how to solve the most common problem in all brand extender, device is not working.
How to Solve Setek Extender Not Working?
Reboot WiFi Extender
There are two methods that you can use to the reboot the extender;
- Unplug the extender from the wall socket and plug it again.
- Find the power button and press it twice.
Reset Setek Extender
You have to find the Extender RESET button, which will be a pinhole button. You have to use a pin or a sharp object to long press the button. After that, you have to set the Setek WiFi extender up again via your computer.
The End Lines
Here, you have learned how to connect your new Setek WiFi extender with your home router with the help of the simple instruction given above.