192.168.10.1 WiFi Repeater Login

There are few steps to access the 192.168.10.1 WiFi repeater login interface, first you have to connect the Wireless-N repeater to the router using WPS method. After that, you have to configure it via computer with the help of the IP address;

• You have to connect the router power cord to the power outlet.
• Connect your Wireless-N WiFi extender to electric wall socket.
• After turning it on, you have to press the WPS button of the router.
• Then, press the WPS button on the extender within two minutes.

Now, begin the login process and complete the Wireless N WiFi repeater setup;

How to Log in to 192.168.10.1?

• Connect the computer or laptop to the WiFi repeater network using SSID details or LAN cable.
• Go to a web browser, enter the login IP address 192.168.10.1 and search.

• You will get to the WiFi repeater interface login window, here; you have to enter the username and password.
• Configure all the settings and complete the signal repeater setup.

After that, you should change the WiFi password with the help of IP address of the Wireless-N repeater;

How to Change WiFi Password of Repeater?

• Access the interface window, and go to the Setting of the dashboard.
• After that choose the Advanced Settings and go to the Wireless Settings.
• Enter the New password at the Password field and save it by clicking on Apply button.

Now, you have to use the new password to connect the repeater and use the internet services. You should also check the new firmware version of the Wireless-N repeater and update if new one is available.

How to Update Repeater Using 192.168.10.1?

To update the repeater, you should use your computer or laptop, just connect it to the network via cable or SSID details.

• Access the interface window, and go to the Setting of the dashboard
• In the settings, you have to open the Firmware tab, and then search for the newest firmware version.
• If it available, then download and paste the downloaded file at the same tab, then click on the Install button.

The Wireless-N repeater will restart itself to install the updates, so do not turn off the router, repeater, and computer.

Troubleshooting Tips and Solutions

Reboot Wireless-N Repeater

The rebooting process shut down all the system and turn it on again, this will refresh the networking device settings and networks. Let’s have a look how to reboot using two different methods;

• You have to find power button and press it twice to shut it down and turn it up (rebooting).
• The other method to restart the device is disconnect the power cord and connect it again in to the electric wall socket.

Reset WiFi Repeater

The last option to dispel any impossible problem to solve is reset the device by following some simple instruction;

The method to reset the device is long pressing the RESET button using a sharp object.

After resetting the repeater, you must apply 192.168.10.1 WiFi repeater setup again.

The End Section

Here you have seen and learned about how to do 192.168.10.1 WiFi repeater login, which helps user to configure the Wireless-N repeater.