How to Complete BrosTrend Extender Setup?
The Brostrend extender setup can be done using the WPS as well as with Ethernet cable. Here you will get to know how to connect, configure and solutions to solve any issues relates to the extender setup. Not only BrosTrend extender boost router signals, you can connect more repeaters and configure them via myrepeater login.
BrosTrend Extender Setup
The extender can be easily connect with you home router using the cable as well as without any cable. Let’s see how to connect the BrosTrend extender in your home;
Through WPS
- There is WPS button on the router as well as extender, which helps you to link the devices without cable.
- Just plug extender into the power outlet, then find the WPS button and press it on the router first and then on the extender.
- Now, wait for just a minute and your devices (extender and router) will connect automatically.
Through Cable
- If you are choosing the cables to connect your device in home, then you have to use Ethernet cable.
- Connect one end of the cable to the router LAN port and another to the extender Ethernet port.
- After the connection you have to log in to the interface to finish the setup from your computer or laptop.
BrosTrend Extender Login
You have to use the IP address written on extender device label or user manual. You should also note the username and password from there.
- Connect the computer or laptop to the BrosTrend extender network.
- Click on the web browser to open and then write IP address 192.168.0.254.
- Search it by pressing the Enter button and you will get to the login page.
- Here, you must enter the username and password, then click on LOGIN.
- You will get in to the interface window, where you can easily manage the settings.
Now, have a look at some of the troubleshooting tips and solutions that can make your issues fix and make error free setup.
Troubleshooting Tips
Place It On Optimal Location
The extender must be linked with the internet devices on the optimal locations in your home. It should be far from the electronic devices like microwave oven or microphones. The reason behind it is signal interruptions.
Ensure Router Connection
Router to extender connection is the most important link which works to provide expanded network and signals. You must check that the router is connected to the extender, and if cable is used to link then check that too. Also you must ensure that the extender is not plugged far from the router.
Reboot WiFi Extender
The other solution to fix the issues is to reboot the device network. To reboot there are two ways;
- Plug out the extender from the wall socket and plug it in again to restart the device.
- The other way to restart the device is to press the power button for two times.
Reset It Last Option to Solve Issue
Reset will be the last option to fix any issues or having glitches in the device;
- Find the reset button on the device.
- Press and hold it for 7 seconds.
- Release it to start the reset process.
After that, you should start the WiFi repeater login process to re-configure the device.
The Conclusion
Here, you have seen and learned about how to complete the BrosTrend extender setup. It includes connection, login, and troubleshooting tips.